LBSSFTP-C6A
Cat6A SFTP Double Shielded Twisted Pair Cable
Foil and braided double-shielded Cat6A cable with 23 AWG solid OFC conductors and 250 MHz bandwidth.
View specifications →PRODUCT CATEGORY
Ethernet & Network Cables
Cat5e, Cat6 and Cat6A options with unshielded, foil-shielded and double-shielded twisted pair constructions listed in the LBS catalog.
SPECIFICATION CATALOG
Compare available products
Open a product to review its model, construction and technical specification before sending an inquiry.
LBSFTP-C6A
Cat6A FTP Shielded Twisted Pair Cable
Foil-shielded Cat6A cable with a tinned-copper drain wire, 23 AWG solid OFC conductors and 250 MHz bandwidth.
View specifications →
LBSUTP-C6A
Cat6A UTP Unshielded Twisted Pair Cable
Unshielded Cat6A cable with 23 AWG solid 4N OFC conductors, an internal cross-filler spline and 250 MHz bandwidth.
View specifications →
LBS6ASSTP-C6A
Cat6A SFTP 10G Shielded Twisted Pair Cable
10 Gbps Cat6A cable with individual foil pair shielding and overall braid.
View specifications →
LBSUTP-C5E
Cat5e UTP Unshielded Twisted Pair Cable
Unshielded Cat5e cable with 24 AWG solid 4N OFC conductors and 150 MHz bandwidth.
View specifications →
LBSFTP-C5E
Cat5e FTP Shielded Twisted Pair Cable
Foil-shielded Cat5e cable with OFC drain wire and 24 AWG solid conductors.
View specifications →
LBSSFTP-C5E
Cat5e SFTP Double Shielded Twisted Pair Cable
Foil and braided shielded Cat5e cable for stable signal transmission in interference-prone installations.
View specifications →SCREENING STRUCTURES COMPARED
Which network cable screening structure fits the route?
Screening is chosen by where the cable runs, not by data rate alone. The table below compares the three structures the LBS catalogue lists for Cat5e and Cat6A, and the blocks below it open the constructions that match each case.
| Construction | Screening | LBS constructions | Where the catalogue lists it |
|---|---|---|---|
| U/UTP | Unshielded. The Cat6A version adds an internal cross-filler spline that physically separates the four pairs. | Cat5e UTP: 24 AWG solid OFC conductors, PE insulation, 6.0 mm grey PVC jacket. Cat6A UTP: 23 AWG solid OFC conductors, PE insulation, blue EPVC jacket, 6.2 / 6.4 / 7.2 mm. | Fixed engineering installation, LAN networks, device control, recording studios, mobile setups. |
| F/UTP | One overall AL-foil screen over the twisted pairs, with a drain wire bonded to it - an OFC drain wire on the Cat5e version, a tinned-copper drain wire on the Cat6A version. | Cat5e FTP: 24 AWG, 6.0 mm grey PVC jacket, nylon ripcord. Cat6A FTP: 23 AWG, 7.2 mm blue PVC jacket, cross-filler spline. | High-noise environments where external EMI and RFI have to be isolated on the route. |
| S/FTP | Foil screening plus an overall tinned-copper braid. On the 10G version each pair carries its own foil shield and the braid is applied over the bundle. | Cat5e SFTP: AL-foil Mylar plus high-density tinned-copper / CCAM braid, 24 AWG, 6.2 mm grey. Cat6A SFTP: foil plus overall tinned-copper braid, 23 AWG, 7.8 mm blue. Cat6A SFTP 10G (LBS6ASSTP-C6A): individual pair foil plus overall braid, Foam-PE insulation, 8.0 mm blue. | High-EMI industrial sites, stage performances and touring; long-distance high-bandwidth Pro-AV and broadcast networks for the 10G construction. |
Start unshielded where the route allows it
U/UTP is the simplest build: twisted pairs, PE insulation and an overall jacket, with no screen to bond at either end. The Cat6A version adds an internal cross-filler spline that physically separates the four pairs, and both the Cat5e and Cat6A versions keep a nylon ripcord for jacket stripping. It is the construction the catalogue lists for fixed engineering installation, LAN networks, device control, recording studios and mobile setups.
Request a Cable Specification →Add an overall foil screen where EMI is present
F/UTP keeps the same twisted-pair core and covers it with one overall AL-foil screen bonded to a drain wire, so the screen can be terminated at the connector. The catalogue lists this structure for isolating external electromagnetic and radio-frequency interference in high-noise environments, and it keeps the ripcord plus the flame-retardant, wear-resistant PVC jacket.
Request a Cable Specification →Specify foil plus braid for the hardest routes
S/FTP stacks an overall tinned-copper braid on top of the foil screening. The Cat5e version uses AL-foil Mylar plus a high-density tinned-copper / CCAM braid and is listed for high-EMI industrial sites, stage performances and touring. The Cat6A version combines foil with the overall braid on 23 AWG conductors, and LBS6ASSTP-C6A shields each pair with its own foil under an overall braid with Foam-PE insulation for 10 Gigabit networks and long-distance Pro-AV and broadcast runs.
- Cat6A S/FTP 10G shielded twisted pair cable
- Cat6A SFTP double-shielded twisted pair cable
- Cat5e SFTP double-shielded twisted pair cable
RELATED RANGES AND GUIDES
Continue specifying
Speaker, audio signal and AV cable sit in their own categories. The guides below cover screening choice, AV-over-IP network cabling, Dante audio networks and hotel AV installations.
SELECTION GUIDES
Guides for choosing within this category
Each guide answers one specification question and links back to the relevant products.
BUYER ROUTES
Buying as a distributor, installer, OEM brand or rental company?
Each route page sets out what that buyer has to settle before a quotation is issued. Open your route, or send the requirement straight to the factory.
Distributors, resellers and bulk supply
The wholesale route sets out what the range covers - the series, core counts and conductor sizes - for distributors and resellers buying in bulk.
Ask About Distributor Supply →Installers and system integrators
Speaker, signal, DMX512, Ethernet and HDMI cable supplied from one Guangzhou factory, with the cable-selection and project-ordering information an installation job needs.
Request a Cable Specification →OEM and private-label brands
The OEM route lists what can be customised - construction, jacket, printing, length, packaging and branding - and how private-label cable projects are handled.
Request an OEM Quote →