High-fidelity transparent flat parallel speaker cable, 2 × 1.5 mm² (1.5 mm² / 16 AWG), PVC insulation with a 4.5 × 9 mm flat PVC jacket.
| Type | 2 × 1.5 mm² |
|---|---|
| Conductors | 2 |
| Cross-section / AWG | 1.5 mm² / 16 AWG |
| Jacket | PVC |
| O.D. | 4.5 × 9 mm |
OFC conductors and flexible PVC construction for low-loss home and professional audio connections.
HI-FI systems, loudspeaker connections and indoor audio installation.
HI-FI系统、扬声器连接与室内音响安装。
This 2 × 1.5 mm² speaker cable is a flat two-core parallel construction: the two insulated cores are moulded side by side in one flat profile, joined by a thin web. Pulled along a floor edge, behind a plinth or under a carpet, it stays flat instead of rotating, which is why the same cable is sold as figure-8 speaker cable, zip cord or flat speaker wire. When a route runs alongside mains or dimmer feeds instead, a twisted construction is the safer choice — the comparison is in figure-8 zip cord vs twisted pair speaker wire.
The nominal O.D. of the 2 × 1.5 mm² size in this series is 4.5 × 9 mm. Cross-section sets the conductor resistance and therefore the loss over a given run, so the size should follow the run length and the load rather than the other way round; the length-versus-gauge table is in the speaker cable gauge guide.
RELATED FLAT HI-FI SPEAKER CABLE VARIANTS
The models below use the same high-fidelity transparent flat parallel construction as this page — 2-core PVC-insulated conductors in a flat PVC jacket (3.5 × 7 mm to 6.5 × 13 mm) — in neighbouring conductor sizes (0.75 mm² / 19 AWG to 4.0 mm² / 12 AWG).
PRODUCT SOURCING FAQ
These answers use the product information shown on this page. Final project terms depend on the confirmed specification.
Please provide the required specification, length or packaging unit, quantity, application and destination country or region.
Construction, jacket color, printing, length, packaging and branding can be reviewed according to the confirmed product and project quantity.
Compare the technical specification table on this page, then send LBS the application and required dimensions if you need help confirming a variant.
REQUEST A QUOTATION
Complete the key details below. The message is sent directly to LBS sales and is not intentionally stored as a lead record in WordPress.
OEM / ODM inquiry
Send the model, specification, quantity and destination. Our team will reply with the next step.