专业音响扩声主流线 - 2 × 4.0 mm²
采用多芯高纯度4N无氧铜导体、PVC绝缘、抗拉填充与柔软PVC护套的专业扩声线。
| 规格 | 2 × 4.0 mm² |
|---|---|
| 导线根数 | 2 |
| 导线横截面积 / 线规 | 4.0 mm² / 12 AWG |
| 导线绝缘体 | PVC |
| 填充物 | Cotton thread with cotton paper |
| 外皮 | PVC |
| 外径 | 11 mm |
| 颜色可选 | Black / royal blue / dark green |
产品细节图 1
产品细节图 2
产品细节图 3
Features
4N oxygen-free copper conductors, PVC insulation, cotton thread and cotton paper reinforcement, flexible PVC jacket, and multiple jacket color options.
Applications / 应用
Touring sound, professional audio installation and fixed building installation.
专业流动演出、音响工程安装及建筑内部固定安装。
Choosing the Right LBSRVH Cross-Section
The LBSRVH series covers main speaker cable from 2 × 1.5 mm² to 2 × 6.0 mm² plus 4-core and 6-core versions. The 2 × 4.0 mm² (12 AWG) construction is the mid-large cross-section in the series, specified for touring sound, professional audio installation and fixed building installation. It suits amplifier-to-speaker runs where the installer wants the current-carrying capacity of 4.0 mm² without stepping up to the heavier 2 × 6.0 mm² drum.
| Model | Conductor | Typical use |
|---|---|---|
| LBSRVH-2X2.5 | 2 × 2.5 mm² (approx. 13 AWG) | Short runs, monitors, lower-power amplifiers |
| LBSRVH-2X3.0 | 2 × 3.0 mm² | General PA and installation runs |
| LBSRVH-2X4.0 (this page) | 2 × 4.0 mm² / 12 AWG | Main speaker runs, touring sound, fixed install |
| LBSRVH-2X6.0 | 2 × 6.0 mm² | Long high-power runs, large PA systems |
As a rule of thumb for professional audio, longer runs and higher amplifier power call for a larger cross-section to limit resistance and voltage drop. For a main left/right speaker run over 20–30 m at typical PA power, 4.0 mm² is a common specification; above that, many engineers step up to 6.0 mm². For short monitor or fill runs, 2.5 mm² is usually enough.
Construction and What It Means in Use
This cable uses 4N oxygen-free copper (OFC) conductors with PVC insulation, cotton thread and cotton paper reinforcement, and a flexible PVC jacket at 11 mm outer diameter. The cotton filling keeps the pair geometry stable when the cable is coiled, packed and pulled on tour, and the flexible jacket helps the cable lie flat in cable trays and around racks. Jacket colour options (black, royal blue, dark green) make channel identification practical in multi-run installations.
Compare the twisted and parallel alternatives in the same factory range: the full speaker cable catalogue lists LBSRVH main cable, LBSRVS twisted speaker cable and LBSRVB parallel speaker cable, so the construction can be matched to the application — parallel for fixed racks, twisted for reduced induced noise in longer signal paths, and jacketed main cable for touring.
Pairing with Connectors and Multichannel Runs
For stage and touring use, LBSRVH-2X4.0 is normally terminated with professional connectors such as the LBSSPK Speakon-compatible connector. In multichannel installations, the 4-core versions of the series (LBSRVH-4X4.0, LBSRVH-6X4.0) let an installer run two or three speaker circuits in a single cable for bi-amping or distributed systems — see the 4-core speaker cable for bi-amping guide for the wiring logic.
Buyer FAQ
What information is needed to quote LBSRVH-2X4.0?
Please provide the required specification, length or packaging unit, quantity, application and destination country or region. LBS confirms the variant, drum or coil packaging and export packing against those details.
Can this cable be supplied in a different jacket colour?
Jacket colour options are black, royal blue and dark green on the standard product. OEM / ODM projects — construction, jacket colour, printing, length, packaging and branding — can be reviewed according to the confirmed product and project quantity through the LBS OEM process.
Is LBSRVH-2X4.0 suitable for permanent building installation?
Yes — the page lists fixed building installation as a documented application alongside touring sound and professional audio installation. For long fixed runs, confirm the routing and required length with LBS before ordering.
How does 4.0 mm² compare to 12 AWG?
4.0 mm² is the metric cross-section; 12 AWG is the equivalent American Wire Gauge designation. The LBS spec table lists the cable as 4.0 mm² / 12 AWG, so either naming convention can be used when specifying.
Can LBSRVH-2X4.0 be cut to custom lengths?
Yes — LBS supplies professional cable in custom lengths for projects. Send the per-run length and total quantity when requesting a quotation so the packaging and drum/coil arrangement can be confirmed.
Ask About LBSRVH-2X4.0
Confirm the cross-section, length, colour and quantity for your speaker cable order — message us on WhatsApp or use the contact form. Related guides: Speaker Cable Gauge Guide · Speaker Cable for Subwoofer · OFC vs CCA Speaker Wire · Custom Cable OEM / ODM Service
Related Guides / 相关指南
- Speaker Cable for KTV: Gauge, Installation and Buying Guide for Karaoke Rooms — gauge and wiring guidance for KTV room installations
- Audio Cable Supplier for Philippines Distributors and Installers — sourcing audio cable for SEA projects
相关演出级规格
同系列其他线规与芯数规格
以下型号与本页产品属于同一演出级音箱线结构——柔性多芯 4N 无氧铜导体、PVC 绝缘、抗拉填充与 PVC 护套——仅为相邻的芯数（2、4、6、8 芯）与导体截面积（1.5 mm² 至 6.0 mm²）规格。
產品採購常見問題解答
在請求報價之前
這些答案使用此頁面上顯示的產品資訊。最終項目條款取決於已確認的規格。
询价 LBSRVH-2X4.0 需要提供什么信息？
請提供所需規格、長度或包裝單位、數量、用途及目的國家或地區。
专业音响扩声主流线 - 2 × 4.0 mm² 是否可以沟通 OEM / ODM 项目？
結構、外套顏色、印刷、長度、包裝和品牌可以根據確認的產品和項目數量進行審核。
我如何選擇正確的變體？
如果您需要協助確認型號，請比較本頁上的技術規格表，然後向 LBS 發送應用程式和所需尺寸。
索取報價
詢問該產品
完成下面的關鍵詳細資訊。該訊息會直接傳送給 LBS 銷售人員，並且不會刻意將其儲存為 WordPress 中的潛在客戶記錄。