유연한 4N OFC 투어 등급 강화 메인 스피커 케이블, 2 × 4.0 mm²(4.0 mm² / 12 AWG), PVC 도체 절연, 면사 및 종이 충진, 11 mm PVC 재킷.
| 유형 | 2 × 4.0 mm² |
|---|---|
| 지휘자 | 2 |
| 단면적 / AWG | 4.0 mm² / 12 AWG |
| 도체 절연 | PVC |
| 충전재 | Cotton thread with cotton paper |
| 재킷 | PVC |
| 재킷 O.D. | 11 mm |
| 색상 옵션 | Black / royal blue / dark green |
4N oxygen-free copper conductors, PVC insulation, cotton thread and cotton paper reinforcement, flexible PVC jacket, and multiple jacket color options.
Touring sound, professional audio installation and fixed building installation.
专业流动演出、音响工程安装及建筑内部固定安装。
The LBSRVH series covers main speaker cable from 2 × 1.5 mm² to 2 × 6.0 mm² plus 4-core and 6-core versions. The 2 × 4.0 mm² (12 AWG) construction is the mid-large cross-section in the series, specified for touring sound, professional audio installation and fixed building installation. It suits amplifier-to-speaker runs where the installer wants the current-carrying capacity of 4.0 mm² without stepping up to the heavier 2 × 6.0 mm² drum.
| Model | Conductor | Typical use |
|---|---|---|
| LBSRVH-2X2.5 | 2 × 2.5 mm² (approx. 13 AWG) | Short runs, monitors, lower-power amplifiers |
| LBSRVH-2X3.0 | 2 × 3.0 mm² | General PA and installation runs |
| LBSRVH-2X4.0 (this page) | 2 × 4.0 mm² / 12 AWG | Main speaker runs, touring sound, fixed install |
| LBSRVH-2X6.0 | 2 × 6.0 mm² | Long high-power runs, large PA systems |
As a rule of thumb for professional audio, longer runs and higher amplifier power call for a larger cross-section to limit resistance and voltage drop. For a main left/right speaker run over 20–30 m at typical PA power, 4.0 mm² is a common specification; above that, many engineers step up to 6.0 mm². For short monitor or fill runs, 2.5 mm² is usually enough.
This cable uses 4N oxygen-free copper (OFC) conductors with PVC insulation, cotton thread and cotton paper reinforcement, and a flexible PVC jacket at 11 mm outer diameter. The cotton filling keeps the pair geometry stable when the cable is coiled, packed and pulled on tour, and the flexible jacket helps the cable lie flat in cable trays and around racks. Jacket colour options (black, royal blue, dark green) make channel identification practical in multi-run installations.
Compare the twisted and parallel alternatives in the same factory range: the full speaker cable catalogue lists LBSRVH main cable, LBSRVS twisted speaker cable and LBSRVB parallel speaker cable, so the construction can be matched to the application — parallel for fixed racks, twisted for reduced induced noise in longer signal paths, and jacketed main cable for touring.
For stage and touring use, LBSRVH-2X4.0 is normally terminated with professional connectors such as the LBSSPK Speakon-compatible connector. In multichannel installations, the 4-core versions of the series (LBSRVH-4X4.0, LBSRVH-6X4.0) let an installer run two or three speaker circuits in a single cable for bi-amping or distributed systems — see the 4-core speaker cable for bi-amping guide for the wiring logic.
Please provide the required specification, length or packaging unit, quantity, application and destination country or region. LBS confirms the variant, drum or coil packaging and export packing against those details.
Jacket colour options are black, royal blue and dark green on the standard product. OEM / ODM projects — construction, jacket colour, printing, length, packaging and branding — can be reviewed according to the confirmed product and project quantity through the LBS OEM process.
Yes — the page lists fixed building installation as a documented application alongside touring sound and professional audio installation. For long fixed runs, confirm the routing and required length with LBS before ordering.
4.0 mm² is the metric cross-section; 12 AWG is the equivalent American Wire Gauge designation. The LBS spec table lists the cable as 4.0 mm² / 12 AWG, so either naming convention can be used when specifying.
Yes — LBS supplies professional cable in custom lengths for projects. Send the per-run length and total quantity when requesting a quotation so the packaging and drum/coil arrangement can be confirmed.
Confirm the cross-section, length, colour and quantity for your speaker cable order — message us on WhatsApp or use the contact form. Related guides: Speaker Cable Gauge Guide · Speaker Cable for Subwoofer · OFC vs CCA Speaker Wire · Custom Cable OEM / ODM Service
관련 투어 등급 변형
아래 모델은 인접한 코어 수(2, 4, 6, 8) 및 도체 크기(1.5mm² ~ 6.0mm²)에서 이 페이지와 동일한 투어 등급 스피커 케이블 구조(유연한 멀티 코어 4N OFC 도체, PVC 절연체, 강화 충진재 및 PVC 재킷)를 사용합니다.
제품 소싱 FAQ
이러한 답변은 이 페이지에 표시된 제품 정보를 사용합니다. 최종 프로젝트 기간은 확정된 사양에 따라 달라집니다.
필요한 사양, 길이 또는 포장 단위, 수량, 용도 및 도착 국가 또는 지역을 알려주십시오.
확정된 제품 및 프로젝트 수량에 따라 구성, 재킷 색상, 프린팅, 길이, 포장, 브랜딩 등을 검토할 수 있습니다.
이 페이지의 기술 사양 표를 비교한 후 변형 확인에 도움이 필요한 경우 LBS에 애플리케이션과 필수 치수를 보내주세요.
견적을 요청하세요
아래의 주요 세부정보를 작성하세요. 메시지는 LBS 영업팀으로 직접 전송되며 의도적으로 WordPress의 리드 레코드로 저장되지 않습니다.