Cat6A FTP シールド付きツイストペア ケーブル
錫メッキ銅ドレインワイヤ、23 AWG ソリッド OFC 導体、250 MHz 帯域幅を備えたホイルシールド Cat6A ケーブル。
| 速度/帯域幅 | 1000 Mbps / 250 MHz |
|---|---|
| ジャケットの色 | Blue |
| ジャケット外径 | 7.2 mm |
| ジャケット | PVC |
| 主導体 | 23 AWG / 0.25 |
| シールド | AL-Foil + Tinned-Copper Drain Wire |
| 温度 | -20°C to 70°C |
ギャラリー画像2
ギャラリー画像3
Cat6A FTP Shielded Twisted Pair Cable. AL-foil shield, tinned-copper drain wire, blue PVC jacket, O.D. 7.2mm, 23AWG solid 4N OFC, cross-filler spline, -20 to +70C. 1Gbps/250MHz. From LBS Catalog 2026.
Cat6A FTP for Shielded 10Gbps Runs
This Cat6A FTP cable adds an aluminium-foil shield and tinned-copper drain wire over the 23AWG solid 4N OFC Cat6A core. The foil shield provides protection against external interference while the drain wire gives a clean termination point for the shield. Cat6A FTP is a practical middle option for 10Gbps horizontal runs where the cable passes near power feeders or lighting circuits but a full double-shielded SFTP cable is not required.
Compare the shielding levels in the LBS Cat6A family: Cat6A UTP (unshielded), this FTP (foil), and Cat6A SFTP (foil plus braid). See UTP vs FTP vs SFTP Ethernet Cable for the full comparison, and the LBS6ASSTP-C6A Cat6A S/FTP 10G cable for the double-shielded backbone option.
Applications / 应用
10Gbps data backbones, AV-over-IP (Dante, AVB, NDI), building network risers, PoE+ cameras and general commercial network installation where foil shielding is specified.
Cat6A FTP FAQ
Q: What is the difference between Cat6A FTP and Cat6A SFTP?
A: FTP uses one aluminium-foil shield over the core. SFTP uses foil plus an overall tinned-copper braid for double shielding, giving more noise immunity in electrically noisy environments.
Q: Does Cat6A FTP support 10Gbps?
A: The LBS 2026 catalog lists this foil-shielded Cat6A construction as Gigabit Ethernet (1000 Mbps / 1 Gbps) with transmission bandwidth up to 250 MHz. The shield type affects noise immunity, not the Gigabit rating. Where a 10 Gbps / 500 MHz backbone is specified, LBS supplies the Cat6A S/FTP 10G construction (LBS6ASSTP-C6A).
Q: Can the drain wire be terminated in standard RJ45?
A: The drain wire is intended to be connected to the shield at the patch panel or equipment end. Your installer should follow the connector manufacturer’s shielded termination instructions.
Cat6A Family Comparison: UTP / FTP / SFTP / S-FTP 10G
Every Cat6A construction in the LBS range shares the same 23 AWG solid 4N OFC conductor and an internal cross-filler spline that keeps the four pairs separated. The buyer choice is the shielding level — and, for the 10G backbone item, the insulation and bandwidth rating. The table uses the values published in the LBS 2026 product catalog, Cat6A series:
| Item / construction | Shielding | Jacket O.D. | Main conductor | Catalogued speed / bandwidth |
|---|---|---|---|---|
| Cat6A UTP (LBSUTP-C6A) Unshielded twisted pair |
None | 6.2 / 6.4 / 7.2 mm | 23 AWG / 0.25 | Gigabit Ethernet (1000 Mbps / 1 Gbps), up to 250 MHz |
| Cat6A FTP (LBSFTP-C6A) (this page) Foil shield + tinned-copper drain wire |
AL-foil + drain wire | 7.2 mm | 23 AWG / 0.25 | Gigabit Ethernet (1000 Mbps / 1 Gbps), up to 250 MHz |
| Cat6A SFTP (LBSSFTP-C6A) AL-foil plus overall tinned-copper braid |
Foil + braid (double) | 7.8 mm | 23 AWG / 0.26 | Gigabit Ethernet (1000 Mbps / 1 Gbps), up to 250 MHz |
| Cat6A S/FTP 10G (LBS6ASSTP-C6A) Individually foil-shielded pairs + overall tinned-copper braid, Foam-PE insulation |
Foil per pair + braid | 8 mm | 23 AWG / 0.26 | 10 Gigabit (10 Gbps), up to 500 MHz |
All four constructions: blue PVC jacket, applicable temperature -20°C to +70°C. Source: LBS 2026 product catalog, Cat6A series. Confirm the exact SKU and construction for your project before ordering.
Selection rule: pick the lowest shielding level the installation actually needs — UTP for clean dedicated data/AV runs, FTP where the run passes near power feeders or lighting circuits, SFTP on stage floors, touring racks and high-EMI routes, and the Cat6A S/FTP 10G item where a 10 Gbps / 500 MHz backbone is specified. For the shielding comparison in detail, see the UTP vs FTP vs SFTP Ethernet Cable guide.
Cat6A 系列对比：四种结构同为 23 AWG 实心 4N 无氧铜导体并带十字骨架，区别在屏蔽等级；表中数值取自 LBS 2026 产品目录 Cat6A 系列页。
📥 Download Full Product Catalog (PDF)
AV over IP Network Cable Selection
In an AV-over-IP project — Dante audio, NDI video, SDVoE or control networks — the Cat6A FTP construction is often the practical choice for links that run through equipment racks, cable trays and corridors where some electrical noise exists but a full double-shielded cable is not required. Three selection rules apply:
- Shielding level follows the environment. Clean dedicated AV network runs can use Cat6A UTP; runs near dimmers, lighting racks or power feeders should use at least FTP; stage floors, touring racks and high-EMI locations should use Cat6A SFTP.
- Category follows the protocol. Gigabit audio control systems run comfortably on Cat6A at 250 MHz; video-heavy systems (4K over NDI or SDVoE) benefit from the 10 Gbps / 500 MHz Cat6A S/FTP backbone.
- Keep one construction per link. Mixing UTP and FTP sections on the same run creates grounding and performance questions — standardise the family on one shielding level per zone.
The LBS Cat6A family covers all three shielding levels with the same 23 AWG solid OFC core and cross-filler spline: Cat6A UTP, this Cat6A FTP, Cat6A SFTP and the Cat6A S/FTP 10G. For a full AV-over-IP specification walkthrough, see the AV over IP network cable guide.
Related Guides
製品調達に関するよくある質問
お見積りを依頼する前に
これらの回答には、このページに表示されている製品情報が使用されています。最終的なプロジェクト条件は確認された仕様によって異なります。
LBSFTP-C6A を引用するにはどのような情報が必要ですか
ご希望の仕様、長さまたは梱包単位、数量、用途、送り先の国または地域をお知らせください。
Cat6A FTP シールド付きツイストペア ケーブルを OEM / ODM プロジェクトで検討できますか
確認された製品とプロジェクトの数量に応じて、構造、ジャケットの色、印刷、長さ、パッケージング、およびブランディングを検討できます。
正しいバリアントを選択するにはどうすればよいですか?
このページの技術仕様表を比較し、バリアントの確認にサポートが必要な場合は、アプリケーションと必要な寸法を LBS に送信してください。
見積もりを依頼する
この商品について質問する
以下の主要な詳細を入力してください。メッセージは LBS 営業に直接送信され、WordPress に潜在顧客レコードとして意図的に保存されることはありません。