انتقل إلى المحتوى
تصنيع كابلات الصوت والإضاءة وكابلات AV بشكل احترافي
LBS LBS AudioCable Factory乐宝声(广东)线缆科技有限公司
🇸🇦 العربية

Features

500 MHz bandwidth, 23 AWG 4N OFC, FPE insulation, cross separator, foil and braid shielding.

Applications / 应用

High-capacity network and multimedia data installations.

高速率、大容量网络与多媒体数据工程。

Cat6A for 10Gbps AV-over-IP Installations

LBS6ASSTP-C6A is a Cat6A S/FTP cable rated for 10Gbps network runs, which makes it the practical backbone for AV-over-IP systems in hotels, conference rooms, KTV buildings, broadcast facilities and live-event venues. Where audio and video are transported over the same network — Dante, AVB, AES67, NDI or IP-based control — the cable must support full 10GBASE-T bandwidth and reject interference from the power and lighting circuits that share the same riser or cable tray.

The S/FTP construction pairs each twisted pair with its own foil screen (S/UTP-style per-pair shielding) and adds an overall tinned-copper braid, giving double shielding for the cable. This is the construction to choose when 10G runs sit close to dimmer packs, motors, high-voltage feeders or other network cables, and when the customer expects clean, predictable link performance on the first test.

Cat6 vs Cat6A: What Changes at 10Gbps

Specification Cat6 Cat6A (LBS6ASSTP-C6A)
Bandwidth 250 MHz 500 MHz
Data rate 1Gbps typical 10Gbps up to 100 m
Conductor 23 AWG solid 23 AWG solid 4N OFC
Construction UTP / FTP S/FTP per-pair foil + overall braid
Typical use 1G networks, PoE, legacy AV 10G backbones, AV-over-IP, dense data

For most B2B AV and network projects, Cat6A is the safe choice for new backbone runs because it supports 10Gbps and higher frequencies without replacing the cable when the network is upgraded. For a comparison of shielding options see UTP vs FTP vs SFTP Ethernet Cable.

Ordering and Specification

  • Available in standard 305 m boxes or custom lengths and drum lengths for projects.
  • Jacket colour, printing, packaging and branding can be reviewed as part of an OEM / ODM project.
  • Pair with Cat6A UTP, Cat6A FTP or Cat6A SFTP when a project mixes shielded and unshielded segments.

Cat6A Cable FAQ

Q: Can Cat6A run 10Gbps over full 100 m?
A: Yes. Cat6A is designed for 10GBASE-T up to 100 metres, which is why it is specified for 10G backbones in AV-over-IP and network projects.

Q: What does S/FTP shielding protect against?
A: Per-pair foil plus an overall braid protects against both external interference and crosstalk between pairs, which matters when data cable runs next to power or lighting circuits.

Q: Can LBS supply Cat6A cable with custom printing?
A: Custom jacket printing, colour, length and packaging can be reviewed as part of an OEM / ODM project — send the requirement through the contact page or WhatsApp.

الأسئلة الشائعة حول مصادر المنتجات

قبل طلب الاقتباس

تستخدم هذه الإجابات معلومات المنتج المعروضة في هذه الصفحة. تعتمد شروط المشروع النهائية على المواصفات المؤكدة.

ما هي المعلومات المطلوبة لاقتباس LBS6ASSTP-C6A

يرجى تقديم المواصفات المطلوبة والطول أو وحدة التعبئة والتغليف والكمية والتطبيق وبلد أو منطقة الوجهة.

هل يمكن مناقشة كابل زوج ملتوي محمي Cat6A SFTP 10G لمشروع OEM / ODM

يمكن مراجعة البناء ولون الغلاف والطباعة والطول والتعبئة والعلامة التجارية وفقًا للمنتج المؤكد وكمية المشروع.

كيف أختار البديل الصحيح؟

قارن جدول المواصفات الفنية في هذه الصفحة، ثم أرسل التطبيق والأبعاد المطلوبة إلى LBS إذا كنت بحاجة إلى مساعدة في تأكيد البديل.

طلب عرض أسعار

اسأل عن هذا المنتج

أكمل التفاصيل الرئيسية أدناه. يتم إرسال الرسالة مباشرة إلى مبيعات LBS ولا يتم تخزينها عمدًا كسجل رئيسي في WordPress.

استفسار OEM / ODM

أخبرنا بما يحتاجه مشروعك.

إرسال النموذج والمواصفات والكمية والوجهة. سيقوم فريقنا بالرد بالخطوة التالية.

WhatsApp الحصول على الاقتباس