HI-FI平行型喇叭线 - 2 × 1.0 mm²
提供透明与扁平护套结构的高保真平行喇叭线。
| 规格 | 2 × 1.0 mm² |
|---|---|
| 导线根数 | 2 |
| 导线横截面积 / 线规 | 1.0 mm² / 18 AWG |
| 外皮 | PVC |
| 外径 | 4 × 8 mm |
产品细节图 1
产品细节图 2
产品细节图 3
Features
OFC conductors and flexible PVC construction for low-loss home and professional audio connections.
Applications / 应用
HI-FI systems, loudspeaker connections and indoor audio installation.
HI-FI系统、扬声器连接与室内音响安装。
Construction: Flat Parallel (Figure-8)
This 2 × 1.0 mm² speaker cable is a flat two-core parallel construction: the two insulated cores are moulded side by side in one flat profile, joined by a thin web. Pulled along a floor edge, behind a plinth or under a carpet, it stays flat instead of rotating, which is why the same cable is sold as figure-8 speaker cable, zip cord or flat speaker wire. When a route runs alongside mains or dimmer feeds instead, a twisted construction is the safer choice — the comparison is in figure-8 zip cord vs twisted pair speaker wire.
Cross-Section 2 × 1.0 mm² / 18 AWG
The nominal O.D. of the 2 × 1.0 mm² size in this series is 4 × 8 mm. Cross-section sets the conductor resistance and therefore the loss over a given run, so the size should follow the run length and the load rather than the other way round; the length-versus-gauge table is in the speaker cable gauge guide.
Related Models
- Flat Elastic Hi-Fi 2 × 0.75 mm² / 19 AWG
- Flat Elastic Hi-Fi 2 × 1.5 mm² / 16 AWG
- RVS-T 2 × 1.0 mm² — the same cross-section in a twisted pair construction
產品採購常見問題解答
在請求報價之前
這些答案使用此頁面上顯示的產品資訊。最終項目條款取決於已確認的規格。
询价 LBSRVB-2X1.0 需要提供什么信息？
請提供所需規格、長度或包裝單位、數量、用途及目的國家或地區。
HI-FI平行型喇叭线 - 2 × 1.0 mm² 是否可以沟通 OEM / ODM 项目？
結構、外套顏色、印刷、長度、包裝和品牌可以根據確認的產品和項目數量進行審核。
我如何選擇正確的變體？
如果您需要協助確認型號，請比較本頁上的技術規格表，然後向 LBS 發送應用程式和所需尺寸。
索取報價
詢問該產品
完成下面的關鍵詳細資訊。該訊息會直接傳送給 LBS 銷售人員，並且不會刻意將其儲存為 WordPress 中的潛在客戶記錄。