2×0.5mm² XLR 公母麦克风成品跳线，适用于长距离跳线；镀锡铜导体、双屏蔽、柔性EPVC外护套、锌合金XLR接头配镀镍触点。
| 布线类别 | Long Distance Patching |
|---|---|
| 标称外径 | 6.8 – 7.2 mm |
| 导体电阻（20°C） | ≤40 Ω/km |
| 导体材料 | Tinned Copper (TC) |
| 绝缘 | PE |
| 屏蔽结构 | AL-Foil Mylar + TC Braided (Double Shielded) |
| 外护套 | Flexible EPVC |
| 线对间电容 | ≤120 pF/m |
| 特性阻抗 | 50–70 Ω (Audio Balanced) |
| 额定电压 | 30 V |
| 适用温度 | -20 °C to +70 °C |
| 接头类型 | 3-Pin XLR Male / Female |
| 接头规格 | Zinc Alloy Housing, Nickel-Plated Contacts |
Finished XLR male-to-female microphone patch cable, 2×0.5mm², for long-distance patching — tinned copper conductors, double shielding, flexible EPVC jacket and zinc alloy XLR connectors with nickel-plated contacts.
This assembly is built with standard 3-pin XLR male and female connectors, the format used for balanced microphone and line-level audio runs.
Choosing the connector and the conductor size for a balanced run: XLR pin counts: 3, 4, 5, 6 and 7-pin explained — what each pin count is for and what each pin on a 3-pin XLR carries. Why an audio cable cannot be swapped for a lighting run: DMX cable vs microphone cable. How the shield and the twisted pair protect the signal: balanced microphone cable construction. The range these variants belong to: audio signal cable.
相关麦克风与 XLR 线规格
以下型号与本页产品属于同一麦克风线系列——2 芯镀锡铜导体、PE 绝缘、铝箔聚酯膜加镀锡铜编织双重屏蔽与柔性 EPVC 护套——仅为相邻的导体截面积（2 × 0.3 mm² 与 2 × 0.5 mm²）规格。LBSMIC-1 为整卷线材；LBSMIC-2 为 XLR 公母成品跳线，采用锌合金接头与镀镍触点。
产品采购常见问题
以下回答以本页产品信息为基础；最终项目条件取决于双方确认的规格。
请提供所需规格、长度或包装单位、数量、应用以及目的国家或地区。
可根据确认后的产品和项目数量评估结构、护套颜色、印字、长度、包装和品牌要求。
请先比较本页技术规格表；如需协助确认规格，请将应用和所需尺寸发送给乐宝声。
获取报价
请填写以下关键信息。信息将直接发送给乐宝声销售，不会在 WordPress 中额外保存为客户线索记录。