HI-FI平行型喇叭线 - 2 × 1.0 mm²
提供透明与扁平护套结构的高保真平行喇叭线。
| 规格 | 2 × 1.0 mm² |
|---|---|
| 导线根数 | 2 |
| 导线横截面积 / 线规 | 1.0 mm² / 18 AWG |
| 外皮 | PVC |
| 外径 | 4 × 8 mm |
产品细节图 1
产品细节图 2
产品细节图 3
Features
OFC conductors and flexible PVC construction for low-loss home and professional audio connections.
Applications / 应用
HI-FI systems, loudspeaker connections and indoor audio installation.
HI-FI系统、扬声器连接与室内音响安装。
Construction: Flat Parallel (Figure-8)
This 2 × 1.0 mm² speaker cable is a flat two-core parallel construction: the two insulated cores are moulded side by side in one flat profile, joined by a thin web. Pulled along a floor edge, behind a plinth or under a carpet, it stays flat instead of rotating, which is why the same cable is sold as figure-8 speaker cable, zip cord or flat speaker wire. When a route runs alongside mains or dimmer feeds instead, a twisted construction is the safer choice — the comparison is in figure-8 zip cord vs twisted pair speaker wire.
Cross-Section 2 × 1.0 mm² / 18 AWG
The nominal O.D. of the 2 × 1.0 mm² size in this series is 4 × 8 mm. Cross-section sets the conductor resistance and therefore the loss over a given run, so the size should follow the run length and the load rather than the other way round; the length-versus-gauge table is in the speaker cable gauge guide.
Related Models
- Flat Elastic Hi-Fi 2 × 0.75 mm² / 19 AWG
- Flat Elastic Hi-Fi 2 × 1.5 mm² / 16 AWG
- RVS-T 2 × 1.0 mm² — the same cross-section in a twisted pair construction
相关扁平 Hi-Fi 音箱线规格
同系列其他导体截面积规格
以下型号与本页产品采用同一高保真透明扁平并行结构——2 芯 PVC 绝缘导体与扁平 PVC 护套（3.5 × 7 mm 至 6.5 × 13 mm）——仅为相邻的导体截面积（0.75 mm² / 19 AWG 至 4.0 mm² / 12 AWG）规格。
产品采购常见问题
提交询价前
以下回答以本页产品信息为基础；最终项目条件取决于双方确认的规格。
询价 LBSRVB-2X1.0 需要提供什么信息？
请提供所需规格、长度或包装单位、数量、应用以及目的国家或地区。
HI-FI平行型喇叭线 - 2 × 1.0 mm² 是否可以沟通 OEM / ODM 项目？
可根据确认后的产品和项目数量评估结构、护套颜色、印字、长度、包装和品牌要求。
如何选择正确的规格？
请先比较本页技术规格表；如需协助确认规格，请将应用和所需尺寸发送给乐宝声。
获取报价
询价此产品
请填写以下关键信息。信息将直接发送给乐宝声销售，不会在 WordPress 中额外保存为客户线索记录。