플랫 탄성 Hi-Fi 스피커 케이블

Features

OFC conductors and flexible PVC construction for low-loss home and professional audio connections.

Applications / 应用

HI-FI systems, loudspeaker connections and indoor audio installation.

HI-FI系统、扬声器连接与室内音响安装。

Construction: Flat Parallel (Figure-8)

This 2 × 0.75 mm² speaker cable is a flat two-core parallel construction: the two insulated cores are moulded side by side in one flat profile, joined by a thin web. Pulled along a floor edge, behind a plinth or under a carpet, it stays flat instead of rotating, which is why the same cable is sold as figure-8 speaker cable, zip cord or flat speaker wire. When a route runs alongside mains or dimmer feeds instead, a twisted construction is the safer choice — the comparison is in figure-8 zip cord vs twisted pair speaker wire.

Cross-Section 2 × 0.75 mm² / 19 AWG

The nominal O.D. of the 2 × 0.75 mm² size in this series is 3.5 × 7 mm. Cross-section sets the conductor resistance and therefore the loss over a given run, so the size should follow the run length and the load rather than the other way round; the length-versus-gauge table is in the speaker cable gauge guide.

Related Models

• Flat Elastic Hi-Fi 2 × 1.0 mm² / 18 AWG
• Flat Elastic Hi-Fi 2 × 1.5 mm² / 16 AWG
• RVS-T 2 × 0.75 mm² — the same cross-section in a twisted pair construction