舞台照明用の片シールド 2 芯シールド DMX512 照明制御ケーブル、編組 64 / 2 × 0.25、6.3 mm マット EPVC ジャケット、高密度 OFC スパイラル シールド (カバー率 85%)。
| 商品番号 | LBSDMX64025 |
|---|---|
| 導体 | 2 |
| ジャケットの色 | Black / brown / dark green optional |
| ジャケット外径 | 6.3 mm |
| ジャケット | EPVC MATT |
| シールド | Single shield — high-density OFC spiral, 85%+ coverage |
| 編み込み | 64 / 2 × 0.25 |
| 適用温度 | -20°C to 70°C |
Elastic PVC jacket, PE insulation, high-density OFC spiral shielding (85%+ coverage) for reliable DMX512 signal transmission.
DMX512 lighting control, stage equipment, KTV and professional show installations.
DMX512灯光控制、舞台设备、KTV与专业演出应用。
The LBSDMX series can be produced to your specification for branded or project requirements:
Contact us for OEM DMX512 lighting control cable quotation →
Standard models are available from stock in 100m rolls. For OEM orders with custom printing and packaging, please send your project requirements for a tailored quotation.
Yes. Custom jacket colours and permanent cable printing with your brand name, model code and specification are available for OEM orders.
Yes, LBS offers pre-assembled XLR terminated DMX512 lighting control cables on request. Please confirm your connector specification, length and quantity.
Yes, the LBSDMX64025 uses high-density OFC spiral shielding (85%+ coverage) and a twisted-pair construction suitable for balanced DMX512 lighting control and line-level audio signals.
Compare the LBSDMX DMX512 lighting control cable models to match the conductor size to your run length:
| Model | Braiding (cores × conductor) | Typical use | Product page |
|---|---|---|---|
| LBSDMX64025 | 64 / 2 × 0.25 | Short DMX fixture drops, patch | Current page |
| LBSDMX96035 | 96 / 2 × 0.35 | Standard DMX runs | View |
| LBSDMX128035 | 128 / 2 × 0.35 | Longer DMX runs, daisy chains | View |
| LBSDMX144050 | 144 / 2 × 0.50 | Heavy-duty touring, long runs | View |
Multichannel stage snakes from 4 to 48 channels are also available in the LBSDMX multichannel series.
DMX512 runs on the RS-485 electrical layer. RS-485 is specified around a 120 Ω nominal characteristic impedance on shielded twisted-pair cable, and impedance comes from the construction — conductor spacing, insulation and shield geometry — not from the copper size alone.
LBS publishes 120 Ω on the double-shielded LBSDMX…-2 models. On this single-shielded model the published data sheet states shield type, braiding, jacket O.D. and temperature range, and does not state an impedance figure. If your project documentation has to carry one, request the value against this model instead of assuming it.
Why the figure matters: DMX termination and daisy-chain rules →
LBS builds two DMX512 families with the same two conductors, the same 6.3 mm matt EPVC jacket and the same -20 °C to +70 °C rating. The difference is the shield, and that is the line the purchase order has to be specific about.
| Construction | Shield | Impedance on the published data sheet | Model example |
|---|---|---|---|
| Single-shielded (this page) | High-density OFC spiral, 85%+ coverage | Not stated | LBSDMX64025 |
| Double-shielded | 100% coverage AL-Foil plus heavy-duty tinned-copper braid | 120 Ω | LBSDMX64025-2 |
Where the run shares a tray, a truss or a cable path with dimmer racks, LED power supplies or motor drives, the foil layer under the braid is the reason to specify the double-shielded construction. Where the data pair is routed clear of that equipment, the single-shielded spiral is the simpler build and the usual choice.
See the double-shielded LBSDMX64025-2 construction → · All DMX lighting cable
製品調達に関するよくある質問
これらの回答には、このページに表示されている製品情報が使用されています。最終的なプロジェクト条件は確認された仕様によって異なります。
ご希望の仕様、長さまたは梱包単位、数量、用途、送り先の国または地域をお知らせください。
確認された製品とプロジェクトの数量に応じて、構造、ジャケットの色、印刷、長さ、パッケージング、およびブランディングを検討できます。
このページの技術仕様表を比較し、バリアントの確認にサポートが必要な場合は、アプリケーションと必要な寸法を LBS に送信してください。
見積もりを依頼する
以下の主要な詳細を入力してください。メッセージは LBS 営業に直接送信され、WordPress に潜在顧客レコードとして意図的に保存されることはありません。