Saltar al contenido
Fabricación profesional de cables de audio, iluminación y AV.
LBS LBS AudioCable Factory乐宝声(广东)线缆科技有限公司
🇪🇸 Español
LBSDMX-48CH

Cuadro desplegable de etapa multicanal

Caja de derivación de escenario de 48 canales y cable tipo serpiente de conexión (LBSDMX-48CH), pares con revestimiento y blindaje individual, conductor principal de 22 AWG/0,35, revestimiento interior de 3,1 mm, revestimiento general de EPVC.

Número de artículo.LBSDMX-48CH
Canales48
construcción de canalesIndividually jacketed and shielded pair per channel
Color de la chaquetaBlack
Chaqueta interior D.E.3.1 mm
chaqueta generalEPVC
conductor principal22 AWG / 0.35
Temperatura aplicable-20°C to 70°C

Features

48 individually numbered channels, HDPE insulation, OFC spiral shield plus foil, 22 AWG / 0.35 mm² main conductor, 3.1 mm inner jacket and a flexible overall EPVC jacket.

Applications / 应用

48 way multicore runs between a large stage box and the console rack, where the channel block is larger than the 24 or 32-channel sizes. / 用于大型舞台接线盒到调音台机柜的 48 路多芯线,适用于路数超过 24 或 32 路的场合。

Related Multichannel Cables / 相关多信道线缆

LBSDMX-48CH is the largest size in the LBS multichannel range. Every other size uses the same numbered-channel, HDPE insulation and spiral-plus-foil shielding construction.

LBSDMX-48CH 是乐宝声多信道线缆系列中最大的规格,其余规格均采用相同的独立编号信道、HDPE 绝缘与绕包加箔屏蔽结构。

Choosing the Right Channel Count / 如何选择信道数

Count the signal paths between the stage panel and the console rack. 48 ways suits a large stage box where inputs, returns and spare channels together exceed the 24 or 32-channel sizes. Choose the smallest model that covers the total with a small spare allowance, and confirm connector format, fan-out length and packing in the enquiry.

请统计舞台接线板与调音台机柜之间的信号路数。当输入、返回与备用信道合计超过 24 路或 32 路规格时,48 路规格适合大型舞台接线盒。请选择能覆盖总数并留少量余量的最小规格,并在询价时确认接头形式、分线长度与包装。

For the channel-count naming convention (12 way multicore, 12ch, 12-channel) and the full 4–48 size table, see the audio snake cable channel-count guide.

LBS multichannel audio snake cable with individually numbered channels

Where this model sits in the stage-to-rack chain

A 48 way multicore is the run between a large stage box and the console rack: one cable carrying 48 balanced channels as 48 pairs inside a single jacket. The two ends are the parts that get decided with the cable — a multipin connector on the stage box, a fan-out or a second multipin at the rack — and the connector format belongs to the stage box, not to the cable.

Hop Cable
Microphone or DI to the stage box Balanced microphone cable, one lead per channel
Stage box to console rack This multichannel cable, 48 ways
Console to system processor and amplifiers Balanced signal cable — not a spare way of this multicore
Amplifier to loudspeaker Speaker cable, by core count and conductor size
Lighting on the same truss DMX512 cable, 120 Ω shielded twisted pair — separate bus

Two substitutions are worth ruling out before an order is placed. A loudspeaker feed is not a balanced line and does not belong on a spare way of a signal multicore; and a DMX512 lighting bus is a 120 Ω twisted pair with its own termination rules, so it is ordered as its own cable rather than taken from this jacket.

The counting rule — inputs, monitor returns, service channels and spares, rounded up to a manufactured size — is set out with a worked example in stage box to mixer: how many ways on a multichannel snake.

Preguntas frecuentes sobre abastecimiento de productos

Antes de solicitar una cotización

Estas respuestas utilizan la información del producto que se muestra en esta página. Los términos finales del proyecto dependen de las especificaciones confirmadas.

Qué información se necesita para cotizar LBSDMX-48CH

Proporcione la especificación requerida, longitud o unidad de embalaje, cantidad, aplicación y país o región de destino.

¿Se puede discutir el Cuadro desplegable de etapa multicanal para un proyecto OEM/ODM?

La construcción, el color de la cubierta, la impresión, la longitud, el embalaje y la marca se pueden revisar de acuerdo con el producto confirmado y la cantidad del proyecto.

¿Cómo elijo la variante correcta?

Compare la tabla de especificaciones técnicas en esta página, luego envíe a LBS la aplicación y las dimensiones requeridas si necesita ayuda para confirmar una variante.

SOLICITAR COTIZACIÓN

Pregunta por este producto

Complete los detalles clave a continuación. El mensaje se envía directamente a ventas de LBS y no se almacena intencionalmente como un registro de cliente potencial en WordPress.

Consulta OEM/ODM

Cuéntanos qué necesita tu proyecto.

Enviar el modelo, especificación, cantidad y destino. Nuestro equipo responderá con el siguiente paso.

WhatsApp Obtener cotización