Features
Elastic PVC jacket, PE insulation, high-density OFC spiral shielding (85%+ coverage) for reliable DMX512 signal transmission.
Applications / 应用
DMX512 lighting control, stage equipment, KTV and professional show installations.
DMX512灯光控制、舞台设备、KTV与专业演出应用。
OEM and Customisation for DMX512 Lighting Control Cable
The LBSDMX series can be produced to your specification for branded or project requirements:
- Conductor and construction: 2-core DMX512 lighting control cable with PE insulation, high-density OFC spiral shielding (85%+ coverage) for reliable DMX512 signal transmission
- Jacket: Elastic PVC, available in black or custom colours
- Printing: Your brand name, model number and specification printed on the jacket
- Packaging: 100m rolls, 305m drums or custom lengths for distributor stocking
- Pre-assembly: XLR male/female termination available on request
Contact us for OEM DMX512 lighting control cable quotation →
Applications
- Stage and live sound: DMX512 lighting control lines for stage fixtures and LED
- Broadcast and studio: Balanced audio routing with low-noise shielding
- KTV and commercial AV: Durable DMX512 lighting control cabling for installed systems
- AV equipment: Channel audio connections in racks and patch panels
FAQ
What is the minimum order quantity for LBSDMX DMX512 lighting control cable?
Standard models are available from stock in 100m rolls. For OEM orders with custom printing and packaging, please send your project requirements for a tailored quotation.
Can the jacket colour and printing be customised for my brand?
Yes. Custom jacket colours and permanent cable printing with your brand name, model code and specification are available for OEM orders.
Can DMX512 lighting control cable be terminated with XLR connectors?
Yes, LBS offers pre-assembled XLR terminated DMX512 lighting control cables on request. Please confirm your connector specification, length and quantity.
Is this cable suitable for balanced audio?
Yes, the LBSDMX64025 uses high-density OFC spiral shielding (85%+ coverage) and a twisted-pair construction suitable for balanced DMX512 lighting control and line-level audio signals.
LBSDMX DMX512 Lighting Control Cable Series — Variants
Compare the LBSDMX DMX512 lighting control cable models to match the conductor size to your run length:
| Model |
Braiding (cores × conductor) |
Typical use |
Product page |
| LBSDMX64025 |
64 / 2 × 0.25 |
Short DMX fixture drops, patch |
Current page |
| LBSDMX96035 |
96 / 2 × 0.35 |
Standard DMX runs |
View |
| LBSDMX128035 |
128 / 2 × 0.35 |
Longer DMX runs, daisy chains |
View |
| LBSDMX144050 |
144 / 2 × 0.50 |
Heavy-duty touring, long runs |
View |
Multichannel stage snakes from 4 to 48 channels are also available in the LBSDMX multichannel series.
DMX512 impedance: what the standard says, and what this data sheet states
DMX512 runs on the RS-485 electrical layer. RS-485 is specified around a 120 Ω nominal characteristic impedance on shielded twisted-pair cable, and impedance comes from the construction — conductor spacing, insulation and shield geometry — not from the copper size alone.
LBS publishes 120 Ω on the double-shielded LBSDMX…-2 models. On this single-shielded model the published data sheet states shield type, braiding, jacket O.D. and temperature range, and does not state an impedance figure. If your project documentation has to carry one, request the value against this model instead of assuming it.
Why the figure matters: DMX termination and daisy-chain rules →
Related Guides
Single-shield or double-shield: what the order has to state
LBS builds two DMX512 families with the same two conductors, the same 6.3 mm matt EPVC jacket and the same -20 °C to +70 °C rating. The difference is the shield, and that is the line the purchase order has to be specific about.
| Construction |
Shield |
Impedance on the published data sheet |
Model example |
| Single-shielded (this page) |
High-density OFC spiral, 85%+ coverage |
Not stated |
LBSDMX64025 |
| Double-shielded |
100% coverage AL-Foil plus heavy-duty tinned-copper braid |
120 Ω |
LBSDMX64025-2 |
Where the run shares a tray, a truss or a cable path with dimmer racks, LED power supplies or motor drives, the foil layer under the braid is the reason to specify the double-shielded construction. Where the data pair is routed clear of that equipment, the single-shielded spiral is the simpler build and the usual choice.
See the double-shielded LBSDMX64025-2 construction → · All DMX lighting cable
