Ungeschirmtes Twisted-Pair-Lautsprecherkabel

Features

4N OFC conductors, flexible PVC insulation and multiple paired color options.

Applications / 应用

Audio projects, meeting rooms, amplifier-to-speaker wiring, car audio and electronics.

音响工程、会议室、功放与音箱连接、汽车音响及电子领域。

Shielded or unshielded for this run?

LBSRVS-T-0.5 is an unjacketed twisted pair: two PVC-insulated 4N OFC conductors twisted together for the whole length. The twist is the interference measure on this construction — interference reaching the pair is induced on both conductors in the same direction and largely cancels at the loudspeaker, which is why a speaker run of this kind normally does not need a shield. A shield becomes the right answer where the cable runs alongside mains or dimmer feeds over a long distance, or where the project specification names a shielded construction. The decision is set out in do speaker cables need shielding?

Specifying LBSRVS-T-0.5

• Construction: 2 × 0.5 mm², 2 conductors, 0.5 mm² (20 AWG), PVC insulation, overall O.D. 2.5 × 5 mm.
• Colour pairing: Blue/Red, Black/Red, White/Red, Yellow/Black, Green/Black, Brown/Blue, Grey/White, Orange/Black (custom color coding available upon request).
• Where it fits: unjacketed, so it belongs inside conduit, trunking or on a cable tray rather than trailing across a floor. The same pair is used for amplifier-to-loudspeaker wiring in meeting rooms, distributed systems and vehicle audio.
• Section for the run: the conductor rule for length and load is in how to choose speaker cable gauge; on a 100 V distributed line see speaker cable for 100 V line distributed audio.

To confirm this section for a project, send the application, the run length, the amplifier output or transformer tap, the required colour coding and the packaging unit.

Other sections in the same family

• Twisted pair unshielded speaker cable 2 × 0.75 mm²
• Twisted pair unshielded speaker cable 2 × 1.0 mm²
• Twisted pair unshielded speaker cable 2 × 1.5 mm²
• Twisted pair unshielded speaker cable 2 × 2.5 mm²