{"id":171,"date":"2026-07-22T08:06:36","date_gmt":"2026-07-22T08:06:36","guid":{"rendered":"http:\/\/lbscable.com\/en\/?post_type=lbs_product&p=171"},"modified":"2026-10-27T05:34:10","modified_gmt":"2026-10-27T05:34:10","slug":"lbsrvb-2x0-75-2-x-0-75-mm2-hi-fi-parallel-speaker-cable","status":"publish","type":"lbs_product","link":"https:\/\/lbscable.com\/cn\/products\/lbsrvb-2x0-75-2-x-0-75-mm2-hi-fi-parallel-speaker-cable\/","title":{"rendered":"Flat Elastic Hi-Fi Speaker Cable – 2×0.75mm"},"content":{"rendered":"

Features<\/h2>\n

OFC conductors and flexible PVC construction for low-loss home and professional audio connections.<\/p>\n

Applications \/ \u5e94\u7528<\/h2>\n

HI-FI systems, loudspeaker connections and indoor audio installation.<\/p>\n

HI-FI\u7cfb\u7edf\u3001\u626c\u58f0\u5668\u8fde\u63a5\u4e0e\u5ba4\u5185\u97f3\u54cd\u5b89\u88c5\u3002<\/p>\n

\"Premium<\/p>\n

Construction: Flat Parallel (Figure-8)<\/h2>\n

This 2 × 0.75 mm² speaker cable is a flat two-core parallel construction: the two insulated cores are moulded side by side in one flat profile, joined by a thin web. Pulled along a floor edge, behind a plinth or under a carpet, it stays flat instead of rotating, which is why the same cable is sold as figure-8 speaker cable, zip cord or flat speaker wire. When a route runs alongside mains or dimmer feeds instead, a twisted construction is the safer choice — the comparison is in figure-8 zip cord vs twisted pair speaker wire<\/a>.<\/p>\n

Cross-Section 2 × 0.75 mm² \/ 19 AWG<\/h2>\n

The nominal O.D. of the 2 × 0.75 mm² size in this series is 3.5 × 7 mm. Cross-section sets the conductor resistance and therefore the loss over a given run, so the size should follow the run length and the load rather than the other way round; the length-versus-gauge table is in the speaker cable gauge guide<\/a>.<\/p>\n

Related Models<\/h2>\n